Advertisement
FTCE General Knowledge Mathematics
This Core Video focuses on Solid Geometry. It is part of our Free FTCE General Knowledge Mathematics Prep Course, which also includes realistic, full-length practice tests with video explanations for every multiple choice question.
Done watching this? Return to the course homepage to access your other free videos.
Return to Course HomepageAdvertisement
Video Transcript
Below is a full text transcript of our FTCE General Knowledge Mathematics video above.
Now let's talk about solid geometry, meaning that we're dealing with three-dimensional shapes. Things we typically see in the real world often are three-dimensional shapes. So, two that come up very often on the exam are cylinders and boxes. We're going to spend a little extra time on those and then we're also going to talk about a few others that come up less commonly but that are good to know as well. First of all, a cylinder, like what you might think of a can of soup or something like that, is a cylinder in the real world.
It's got two circles at the top and bottom. If we were to take those top and bottom off the soup can, cut the side, and unroll it, we have a rectangle as the side. So, we have two circles and a rectangle. We can use our knowledge of two-dimensional shapes to find things about this three-dimensional shape, particularly if you're looking for its surface area. You can simply find the area of the two circles, and the area of a rectangle, using the formulas that you already know. Add them up and you know the area of the entire surface of that cylinder, or it's surface area.
You don't have to really memorize additional formulas. You can use the ones you already know, from two-dimensional geometry, or plane geometry, and often apply them to solid geometry. That's what you do if you're looking for surface area. If you're looking for the volume, like how much soup it takes to fill the can up, then you're looking for the area of the base, which is a circle, times the height. Let me give you one trick, especially when you're looking for surface area, that you can sometimes use.
Sometimes you will not be given the length of that rectangle. So you're given the radius of the circle and you're given the height. Using the radius, you can find the area of both of the circles, and the height, you have that one dimension of the rectangle, but you're missing the other dimension. How can you find that other dimension of the rectangle? The circumference of the circle, because when that side wrapped all the way around the circle, the length of that side of the rectangle is the same as the distance around the circle.
Remember, circumference is the distance around the circle. So, the circumference can be used to find the length of that side of the rectangle. Boxes also come up fairly commonly. If you're looking for the volume of a box, you're just taking the length of it, times the width of it, times the height of it. A box is made up of six rectangles. If you have a box that's made up of six squares, we call that a cube. Something like a die, which we see pictured here, is an example of a cubic shape. All of its sides have the same length.
If you're looking for the surface area of a rectangle, or of a box I should say, you're really just trying to find the areas of all six of those rectangles. They're in pairs, basically, because the top of the box and the bottom is the same, the front is the same as the back, and the left side is the same as the right side. If you know the top, if you know the side, and if you know the front, you just double each of those and that gives you the back, the other side, and the bottom. Then you're adding all of those up to get the area of the whole surface.
You could express that surface area as two times the length times the width, plus two times the length times the height, plus two times the width times the height. Sometimes you're going to be asked to find the volume of only part of a shape. so be careful. For example, in this box here, it's been partially filled with water, for example. It says that it's been filled with two inches, what is the volume of water needed to finish filling the container? Be careful if you see words like "finish" or "complete", or something like that.
That's telling you you're only finding the remaining part, as opposed to finding the whole thing. In this case, volume, we know, is length times width times height, but we're not going to use the eight as the height here, because that's the total height and it's already filled two inches. You have to subtract that two inches and use six for the height, since you only want to find the remaining part. So, 20 times 10 times 6 is going to give you the volume, which in this case is 1200 cubic inches. Less commonly, you will sometimes also encounter cones.
To find the volume of a cone, you need to know the height of that cone, which is a perpendicular line from the middle of that circle to the top point of the cone, and you need to know the radius of that circle that is the base of the cone. If you know those two things, then you multiply one third times pi, times the radius squared, times the height. If you're trying to find the surface area of a cone, you also need to know it's side, so the sloping part if you drew a line from the outer edge of that circle to the top point of the cone, that's side length.
If you were finding the surface area of that cone, it's pi times the radius times the side length. Then you add to that pi r squared. Pi r squared is the circle. That gives you the area of that base part. The pi times the radius times the side, gives you the area of that conical part that goes around the top. Then lastly, spheres. The volume of a sphere is four thirds times pi times the radius cubed. Typically, on the exam, you're not going to see them breaking spheres into component two-dimensional parts.
If they asked you this, it would simply be a matter of memorizing this formula. The surface area is also the same thing. Usually, you're not going to find it by breaking it into component parts. You're just going to be given the radius, for example, from the inner point of that sphere to its outer edge and you're going to multiply four times pi times the radius squared and that's going to give you the surface area, the entire outside of that sphere. This doesn't come up quite as often as boxes and cylinders, but it's good to know as well.